How to identify the material and hardware of the o

2022-07-22
  • Detail

Board material: the surface composition of the board is melamine finish, which does not need paint. The surface is fine, the structure is flat, the texture is hard, moth proof and flame retardant. It is called "flawless board" abroad

three males · Aurora home furnishing flagship store

1 Board material: the surface composition of the board is melamine finish, which does not need paint. The surface is fine, the structure is flat, the texture is hard, moth proof and flame retardant, which is called “ Flawless plate ”. The intermediate base material is medium density board, and the density cannot be lower than 0.80g/cm3, otherwise it will affect the gravity bearing and flatness; The water content cannot be lower than 6.5%, but it cannot be too high, otherwise it cannot be adjusted according to the climate change; Surface technology, using hand touch to identify whether it is embossed surface or flat, embossed surface is the best; Formaldehyde emission is 1.1mg/l, which meets the European E1 standard, and there is a test report. Be alert to particleboard and dyed moisture-proof board. In addition, good board has the functions of anti ant and anti mildew

2. Plate anti-counterfeiting: there are brand marks on both sides of the embossed plate and the edge banding position

3. Smell the smell and soak in water (those that rise too fast or do not rise should be banned)

4. Edge banding: whether it is smooth, delicate and has strong adhesion (be careful to crack with fake and inferior technology)

5. The inside and outside should be the same: look at the material in the side plate hole. Of course, be careful of the materials inside the side plates, solid plates and laminates (four sides are sealed) of the cabinet without holes

6. Standard specification plate: only when there are standards can the process and accuracy be guaranteed

7. Aluminum alloy sliding door frame material: the cross section is bright and smooth without burrs, and the minimum wall thickness is required to reach 1.1mm

8. Whether the key hardware accessories are marked with their own brand anti-counterfeiting logo, as well as their weight (such as drawer guide rail, etc.)

9. Push and pull listen to the sound to judge the quality of the pulley, but it does not mean that the smaller the sound, the better (it may be made of engineering plastic or nylon); Whether the upper rail guide wheel has the adjustment function

10. In short, carefully understand the samples and prevent consumption traps

太原银屑病医院

兰州不孕不育医院

福州肿瘤医院

Copyright © 2011 JIN SHI